Split ring resonator biosensor-an innovative design and analysis

Ankit Singh; Alok Raj; Ankur Gupta; Akhilesh Tiwari; Pramod Kumar

doi:10.1109/icp46580.2020.9206451

Split ring resonator biosensor-an innovative design and analysis

Ankit Singh
, Alok Raj
, Ankur Gupta
, Akhilesh Tiwari
, Pramod Kumar

Modeling and Simulation Laboratory
Indian Institute of Information Technology, Allahabad

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

8 Scopus citations

Abstract

In this study, a split ring resonator (SRR) design is simulated for the detection of different cancer cells in biosensing application using COMSOL Multiphysics software. Finite element method (FEM) is used to evaluate electric field distribution in SRR. The analysis of biosensor is done in microwave region. Small change in dielectric constant produces shift in resonant peak of SRR so this biosensor can be used for the detection of different types of cancer cells like Hela, PC12, MDA-MB-231, MCF-7, Jurkat. The advantages of this biosensor are low cost manufacturing and level free sensing with appropriate sensitivity.

Original language	English
Title of host publication	2020 IEEE 8th International Conference on Photonics, ICP 2020
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	117-118
Number of pages	2
ISBN (Electronic)	9781728105185
DOIs	https://doi.org/10.1109/icp46580.2020.9206451
State	Published - May 2020
Externally published	Yes
Event	8th IEEE International Conference on Photonics, ICP 2020 - Kota Bharu, Kelantan, Malaysia Duration: 16 May 2020 → 18 May 2020

Publication series

Name	2020 IEEE 8th International Conference on Photonics, ICP 2020

Conference

Conference	8th IEEE International Conference on Photonics, ICP 2020
Country/Territory	Malaysia
City	Kota Bharu, Kelantan
Period	16/05/20 → 18/05/20

Bibliographical note

Publisher Copyright:
© 2020 IEEE.

Funding

Authors express their sincere thanks to all members of Spintronics & Metamaterials Laboratory, IIIT Allahabad.

Funders
IIIT Allahabad
Spintronics & Metamaterials Laboratory

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

Keywords

Biosensors
Finite element method
Split ring resonators
cancer cell detection

Access to Document

10.1109/icp46580.2020.9206451

Cite this

Singh, A., Raj, A., Gupta, A., Tiwari, A., & Kumar, P. (2020). Split ring resonator biosensor-an innovative design and analysis. In 2020 IEEE 8th International Conference on Photonics, ICP 2020 (pp. 117-118). Article 9206451 (2020 IEEE 8th International Conference on Photonics, ICP 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/icp46580.2020.9206451

@inproceedings{eb6ac4b24cd1498bad03dda5f2f781a6,

title = "Split ring resonator biosensor-an innovative design and analysis",

abstract = "In this study, a split ring resonator (SRR) design is simulated for the detection of different cancer cells in biosensing application using COMSOL Multiphysics software. Finite element method (FEM) is used to evaluate electric field distribution in SRR. The analysis of biosensor is done in microwave region. Small change in dielectric constant produces shift in resonant peak of SRR so this biosensor can be used for the detection of different types of cancer cells like Hela, PC12, MDA-MB-231, MCF-7, Jurkat. The advantages of this biosensor are low cost manufacturing and level free sensing with appropriate sensitivity.",

keywords = "Biosensors, Finite element method, Split ring resonators, cancer cell detection",

author = "Ankit Singh and Alok Raj and Ankur Gupta and Akhilesh Tiwari and Pramod Kumar",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 8th IEEE International Conference on Photonics, ICP 2020 ; Conference date: 16-05-2020 Through 18-05-2020",

year = "2020",

month = may,

doi = "10.1109/icp46580.2020.9206451",

language = "אנגלית",

series = "2020 IEEE 8th International Conference on Photonics, ICP 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "117--118",

booktitle = "2020 IEEE 8th International Conference on Photonics, ICP 2020",

address = "ארצות הברית",

}

Singh, A, Raj, A, Gupta, A, Tiwari, A & Kumar, P 2020, Split ring resonator biosensor-an innovative design and analysis. in 2020 IEEE 8th International Conference on Photonics, ICP 2020., 9206451, 2020 IEEE 8th International Conference on Photonics, ICP 2020, Institute of Electrical and Electronics Engineers Inc., pp. 117-118, 8th IEEE International Conference on Photonics, ICP 2020, Kota Bharu, Kelantan, Malaysia, 16/05/20. https://doi.org/10.1109/icp46580.2020.9206451

Split ring resonator biosensor-an innovative design and analysis. / Singh, Ankit; Raj, Alok; Gupta, Ankur et al.
2020 IEEE 8th International Conference on Photonics, ICP 2020. Institute of Electrical and Electronics Engineers Inc., 2020. p. 117-118 9206451 (2020 IEEE 8th International Conference on Photonics, ICP 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Split ring resonator biosensor-an innovative design and analysis

AU - Singh, Ankit

AU - Raj, Alok

AU - Gupta, Ankur

AU - Tiwari, Akhilesh

AU - Kumar, Pramod

PY - 2020/5

Y1 - 2020/5

N2 - In this study, a split ring resonator (SRR) design is simulated for the detection of different cancer cells in biosensing application using COMSOL Multiphysics software. Finite element method (FEM) is used to evaluate electric field distribution in SRR. The analysis of biosensor is done in microwave region. Small change in dielectric constant produces shift in resonant peak of SRR so this biosensor can be used for the detection of different types of cancer cells like Hela, PC12, MDA-MB-231, MCF-7, Jurkat. The advantages of this biosensor are low cost manufacturing and level free sensing with appropriate sensitivity.

AB - In this study, a split ring resonator (SRR) design is simulated for the detection of different cancer cells in biosensing application using COMSOL Multiphysics software. Finite element method (FEM) is used to evaluate electric field distribution in SRR. The analysis of biosensor is done in microwave region. Small change in dielectric constant produces shift in resonant peak of SRR so this biosensor can be used for the detection of different types of cancer cells like Hela, PC12, MDA-MB-231, MCF-7, Jurkat. The advantages of this biosensor are low cost manufacturing and level free sensing with appropriate sensitivity.

KW - Biosensors

KW - Finite element method

KW - Split ring resonators

KW - cancer cell detection

UR - https://www.scopus.com/pages/publications/85093985044

U2 - 10.1109/icp46580.2020.9206451

DO - 10.1109/icp46580.2020.9206451

M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???

AN - SCOPUS:85093985044

T3 - 2020 IEEE 8th International Conference on Photonics, ICP 2020

SP - 117

EP - 118

BT - 2020 IEEE 8th International Conference on Photonics, ICP 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 8th IEEE International Conference on Photonics, ICP 2020

Y2 - 16 May 2020 through 18 May 2020

ER -

Split ring resonator biosensor-an innovative design and analysis

Abstract

Publication series

Conference

Bibliographical note

Funding

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this