Pseudo­Isochronous Cell Switching in ATM Networks

C.­S. Li, Y. Ofek, A. Segall, K. Sohrabi

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

This paper shows how to design an ATM network, for real-time traffic, such that under full network load (i) the maximum delay of a low-rate voice connection is minimized, (ii) the delay uncertainty or jitter is a fixed network parameter, and (iii) the required buffer sizes (inside the network) to ensure loss-free routing is minimized. In addition, this design does not exclude the integration of other classes of traffic, such as connectionless, which have lower priority. The isochronous timing information is used only for regulating and pacing the traffic forwarded inside the network rather than for routing as in traditional circuit switching networks. This means that an ATM cell is sent from one switch to another not at a very specific time but within a time frame of a relatively long duration as compared to the cell transmission time. The routing of cells of each connection is based on VCI and VPI, and as a result, timing errors do not affect the ATM routing. Analytical and simulation results are presented, which demonstrate the effectiveness of this switching approach
Original languageAmerican English
Title of host publicationINFOCOM '94. Networking for Global Communications., 13th Proceedings IEEE
PublisherIEEE
StatePublished - 1994

Bibliographical note

Place of conference:Canada

Fingerprint

Dive into the research topics of 'Pseudo­Isochronous Cell Switching in ATM Networks'. Together they form a unique fingerprint.

Cite this