Design and development of resonant ring test setup at 325 MHz for high power testing of RF couplers used in accelerator

Sonal Sharma; Mentes Jose; Gireesh Singh; Rajesh Kumar

doi:10.1016/j.nima.2024.170029

Design and development of resonant ring test setup at 325 MHz for high power testing of RF couplers used in accelerator

Sonal Sharma, Mentes Jose, Gireesh Singh, Rajesh Kumar

Bhabha Atomic Research Centre

Research output: Contribution to journal › Article › peer-review

Abstract

A travelling wave resonant ring has been developed at Bhabha Atomic Research Centre (BARC) to test 325 MHz radio frequency (RF) power couplers for accelerator cavities. It mainly consists of half height rectangular waveguide components. The ring has been tested for output power of 30 kW with gain of 14.4 dB. Presently, RF characterization and high power testing has been completed without RF couplers. The design, RF simulations and characterization of the entire ring, along with the high power test results, are presented in this paper.

Original language	English
Article number	170029
Journal	Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Volume	1070
DOIs	https://doi.org/10.1016/j.nima.2024.170029
State	Published - Jan 2025
Externally published	Yes

Bibliographical note

Publisher Copyright:
© 2024 Elsevier B.V.

Keywords

Directional coupler
High power
RF couplers
RF simulation
Resonant ring
Travelling wave
Waveguides

Access to Document

10.1016/j.nima.2024.170029

Cite this

@article{72d29a45c69e435ba932a9451d9a3161,

title = "Design and development of resonant ring test setup at 325 MHz for high power testing of RF couplers used in accelerator",

abstract = "A travelling wave resonant ring has been developed at Bhabha Atomic Research Centre (BARC) to test 325 MHz radio frequency (RF) power couplers for accelerator cavities. It mainly consists of half height rectangular waveguide components. The ring has been tested for output power of 30 kW with gain of 14.4 dB. Presently, RF characterization and high power testing has been completed without RF couplers. The design, RF simulations and characterization of the entire ring, along with the high power test results, are presented in this paper.",

keywords = "Directional coupler, High power, RF couplers, RF simulation, Resonant ring, Travelling wave, Waveguides",

author = "Sonal Sharma and Mentes Jose and Gireesh Singh and Rajesh Kumar",

note = "Publisher Copyright: {\textcopyright} 2024 Elsevier B.V.",

year = "2025",

month = jan,

doi = "10.1016/j.nima.2024.170029",

language = "אנגלית",

volume = "1070",

journal = "Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment",

issn = "0168-9002",

publisher = "Elsevier B.V.",

}

Design and development of resonant ring test setup at 325 MHz for high power testing of RF couplers used in accelerator. / Sharma, Sonal; Jose, Mentes; Singh, Gireesh et al.
In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 1070, 170029, 01.2025.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Design and development of resonant ring test setup at 325 MHz for high power testing of RF couplers used in accelerator

AU - Sharma, Sonal

AU - Jose, Mentes

AU - Singh, Gireesh

AU - Kumar, Rajesh

PY - 2025/1

Y1 - 2025/1

N2 - A travelling wave resonant ring has been developed at Bhabha Atomic Research Centre (BARC) to test 325 MHz radio frequency (RF) power couplers for accelerator cavities. It mainly consists of half height rectangular waveguide components. The ring has been tested for output power of 30 kW with gain of 14.4 dB. Presently, RF characterization and high power testing has been completed without RF couplers. The design, RF simulations and characterization of the entire ring, along with the high power test results, are presented in this paper.

AB - A travelling wave resonant ring has been developed at Bhabha Atomic Research Centre (BARC) to test 325 MHz radio frequency (RF) power couplers for accelerator cavities. It mainly consists of half height rectangular waveguide components. The ring has been tested for output power of 30 kW with gain of 14.4 dB. Presently, RF characterization and high power testing has been completed without RF couplers. The design, RF simulations and characterization of the entire ring, along with the high power test results, are presented in this paper.

KW - Directional coupler

KW - High power

KW - RF couplers

KW - RF simulation

KW - Resonant ring

KW - Travelling wave

KW - Waveguides

UR - http://www.scopus.com/inward/record.url?scp=85208108650&partnerID=8YFLogxK

U2 - 10.1016/j.nima.2024.170029

DO - 10.1016/j.nima.2024.170029

M3 - ???researchoutput.researchoutputtypes.contributiontojournal.article???

AN - SCOPUS:85208108650

SN - 0168-9002

VL - 1070

JO - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

M1 - 170029

ER -

Design and development of resonant ring test setup at 325 MHz for high power testing of RF couplers used in accelerator

Abstract

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this