Design and Analysis of DC Power Supply for Solid-State Power Amplifier

Rohit Agarwal; Rajesh Kumar; Gajendra Suthar; Hrushikesh Dalicha

doi:10.1007/978-981-15-0206-4_11

Design and Analysis of DC Power Supply for Solid-State Power Amplifier

Rohit Agarwal
, Rajesh Kumar
, Gajendra Suthar
, Hrushikesh Dalicha

ITER
Homi Bhabha National Institute
Institute for Plasma Research

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

DC power supply required for 12 kW solid-state RF power amplifier (SSPA) is designed and analyzed. Rating (30–65 V, 320 A) and topology of power supply are derived to satisfy load requirement.The selected topology is twelve-pulse rectifier followed by interphase transformer and synchronous buck converter to get desired output voltage. Modular design is selected to minimize copper losses, to reduce the voltage drop and to optimize the resources available. Simulation is done using PSIM software to analyze the performance in entire operating range and validation of the design. Prototype model is developed with same voltage range (30–65 V) but lower current rating (10 A). Testing is done at different voltage and current levels to analyze steady state and dynamic performance. The simulation and experimental results are in good agreement.

Original language	English
Title of host publication	Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019
Editors	Axaykumar Mehta, Abhishek Rawat, Priyesh Chauhan
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	129-138
Number of pages	10
ISBN (Print)	9789811502057
DOIs	https://doi.org/10.1007/978-981-15-0206-4_11
State	Published - 2020
Externally published	Yes
Event	International Conference on Power, Control and Communication Infrastructure,ICPCCI 2019 - Ahmedabad, India Duration: 4 Jul 2019 → 5 Jul 2019

Publication series

Name	Lecture Notes in Electrical Engineering
Volume	608
ISSN (Print)	1876-1100
ISSN (Electronic)	1876-1119

Conference

Conference	International Conference on Power, Control and Communication Infrastructure,ICPCCI 2019
Country/Territory	India
City	Ahmedabad
Period	4/07/19 → 5/07/19

Bibliographical note

Publisher Copyright:
© 2020, Springer Nature Singapore Pte Ltd.

Keywords

Interphase transformer
Power supply
RF power amplifier
Synchronous buck converter

Access to Document

10.1007/978-981-15-0206-4_11

Cite this

Agarwal, R., Kumar, R., Suthar, G., & Dalicha, H. (2020). Design and Analysis of DC Power Supply for Solid-State Power Amplifier. In A. Mehta, A. Rawat, & P. Chauhan (Eds.), Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019 (pp. 129-138). (Lecture Notes in Electrical Engineering; Vol. 608). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-15-0206-4_11

Agarwal, Rohit ; Kumar, Rajesh ; Suthar, Gajendra et al. / Design and Analysis of DC Power Supply for Solid-State Power Amplifier. Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019. editor / Axaykumar Mehta ; Abhishek Rawat ; Priyesh Chauhan. Springer Science and Business Media Deutschland GmbH, 2020. pp. 129-138 (Lecture Notes in Electrical Engineering).

@inproceedings{a06af1536bb34b3f9bef4f2b9026a2d4,

title = "Design and Analysis of DC Power Supply for Solid-State Power Amplifier",

abstract = "DC power supply required for 12 kW solid-state RF power amplifier (SSPA) is designed and analyzed. Rating (30{\textendash}65 V, 320 A) and topology of power supply are derived to satisfy load requirement.The selected topology is twelve-pulse rectifier followed by interphase transformer and synchronous buck converter to get desired output voltage. Modular design is selected to minimize copper losses, to reduce the voltage drop and to optimize the resources available. Simulation is done using PSIM software to analyze the performance in entire operating range and validation of the design. Prototype model is developed with same voltage range (30{\textendash}65 V) but lower current rating (10 A). Testing is done at different voltage and current levels to analyze steady state and dynamic performance. The simulation and experimental results are in good agreement.",

keywords = "Interphase transformer, Power supply, RF power amplifier, Synchronous buck converter",

author = "Rohit Agarwal and Rajesh Kumar and Gajendra Suthar and Hrushikesh Dalicha",

note = "Publisher Copyright: {\textcopyright} 2020, Springer Nature Singapore Pte Ltd.; International Conference on Power, Control and Communication Infrastructure,ICPCCI 2019 ; Conference date: 04-07-2019 Through 05-07-2019",

year = "2020",

doi = "10.1007/978-981-15-0206-4\_11",

language = "אנגלית",

isbn = "9789811502057",

series = "Lecture Notes in Electrical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "129--138",

editor = "Axaykumar Mehta and Abhishek Rawat and Priyesh Chauhan",

booktitle = "Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019",

address = "גרמניה",

}

Agarwal, R, Kumar, R, Suthar, G & Dalicha, H 2020, Design and Analysis of DC Power Supply for Solid-State Power Amplifier. in A Mehta, A Rawat & P Chauhan (eds), Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019. Lecture Notes in Electrical Engineering, vol. 608, Springer Science and Business Media Deutschland GmbH, pp. 129-138, International Conference on Power, Control and Communication Infrastructure,ICPCCI 2019, Ahmedabad, India, 4/07/19. https://doi.org/10.1007/978-981-15-0206-4_11

Design and Analysis of DC Power Supply for Solid-State Power Amplifier. / Agarwal, Rohit; Kumar, Rajesh; Suthar, Gajendra et al.
Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019. ed. / Axaykumar Mehta; Abhishek Rawat; Priyesh Chauhan. Springer Science and Business Media Deutschland GmbH, 2020. p. 129-138 (Lecture Notes in Electrical Engineering; Vol. 608).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and Analysis of DC Power Supply for Solid-State Power Amplifier

AU - Agarwal, Rohit

AU - Kumar, Rajesh

AU - Suthar, Gajendra

AU - Dalicha, Hrushikesh

PY - 2020

Y1 - 2020

N2 - DC power supply required for 12 kW solid-state RF power amplifier (SSPA) is designed and analyzed. Rating (30–65 V, 320 A) and topology of power supply are derived to satisfy load requirement.The selected topology is twelve-pulse rectifier followed by interphase transformer and synchronous buck converter to get desired output voltage. Modular design is selected to minimize copper losses, to reduce the voltage drop and to optimize the resources available. Simulation is done using PSIM software to analyze the performance in entire operating range and validation of the design. Prototype model is developed with same voltage range (30–65 V) but lower current rating (10 A). Testing is done at different voltage and current levels to analyze steady state and dynamic performance. The simulation and experimental results are in good agreement.

AB - DC power supply required for 12 kW solid-state RF power amplifier (SSPA) is designed and analyzed. Rating (30–65 V, 320 A) and topology of power supply are derived to satisfy load requirement.The selected topology is twelve-pulse rectifier followed by interphase transformer and synchronous buck converter to get desired output voltage. Modular design is selected to minimize copper losses, to reduce the voltage drop and to optimize the resources available. Simulation is done using PSIM software to analyze the performance in entire operating range and validation of the design. Prototype model is developed with same voltage range (30–65 V) but lower current rating (10 A). Testing is done at different voltage and current levels to analyze steady state and dynamic performance. The simulation and experimental results are in good agreement.

KW - Interphase transformer

KW - Power supply

KW - RF power amplifier

KW - Synchronous buck converter

UR - https://www.scopus.com/pages/publications/85088662517

U2 - 10.1007/978-981-15-0206-4_11

DO - 10.1007/978-981-15-0206-4_11

M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???

AN - SCOPUS:85088662517

SN - 9789811502057

T3 - Lecture Notes in Electrical Engineering

SP - 129

EP - 138

BT - Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019

A2 - Mehta, Axaykumar

A2 - Rawat, Abhishek

A2 - Chauhan, Priyesh

PB - Springer Science and Business Media Deutschland GmbH

T2 - International Conference on Power, Control and Communication Infrastructure,ICPCCI 2019

Y2 - 4 July 2019 through 5 July 2019

ER -

Agarwal R, Kumar R, Suthar G, Dalicha H. Design and Analysis of DC Power Supply for Solid-State Power Amplifier. In Mehta A, Rawat A, Chauhan P, editors, Advances in Electric Power and Energy Infrastructure - Proceedings of ICPCCI 2019. Springer Science and Business Media Deutschland GmbH. 2020. p. 129-138. (Lecture Notes in Electrical Engineering). doi: 10.1007/978-981-15-0206-4_11

Design and Analysis of DC Power Supply for Solid-State Power Amplifier

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this