Characteristics of ultraviolet-assisted pulsed laser deposited thin oxide films

V. Craciun, R. K. Singh

Research output: Contribution to journalArticlepeer-review

Abstract

The properties of thin oxide films such as Y2O3, ZnO and Ba0.5Sr0.5TiO3 grown using an in situ ultraviolet (UV)-assisted pulsed laser deposition (UVPLD) technique have been studied. With respect to films grown by conventional PLD under similar conditions but without UV illumination, the UVPLD grown films exhibited better structural and optical and electrical properties, especially for lower substrate temperatures. They also exhibited a better stoichiometry and contained less physisorbed oxygen than the conventional PLD grown layers. These improvements can be traced to several factors. Firstly, deep UV photons and ozone ensure a better in situ cleaning of the substrate prior to the deposition. Secondly, the presence of more reactive gaseous species like ozone and atomic oxygen formed by photodissociation of molecular O2 promotes the growth of more oxygenated films. Thirdly, absorption of UV photons by adatoms could result in an increased of their surface mobility. All these factors have a beneficial effect upon crystalline growth, especially for moderate substrate temperatures. For optimised growth conditions, the crystalline quality and properties of ultraviolet-assisted pulsed laser deposited films was similar to that of films grown using conventional PLD at substrate temperatures of at least 200°C higher.

Original languageEnglish
Pages (from-to)305-316
Number of pages12
JournalMaterials Research Society Symposium - Proceedings
Volume623
DOIs
StatePublished - 2000
Externally publishedYes

Funding

We would like to thank J. Perriere for RBS measurements, J. Spear for XRD measurements, J. M. Howard for CV and IV measurements, and N. D. Bassim for TEM analysis. Part of this research was funded by a grant from DOE #99020291

FundersFunder number
U.S. Department of Energy

    Fingerprint

    Dive into the research topics of 'Characteristics of ultraviolet-assisted pulsed laser deposited thin oxide films'. Together they form a unique fingerprint.

    Cite this